通過式噴淋清洗機是一臺自動噴淋清洗設備，主要用于清潔工件生產過程中表面的鐵屑、油污、灰塵、蠟、氧化層等。采用高壓水對工件表面進行高壓沖洗、沖刷、浸泡和噴射等，去污能力強、脫水快，同時還具有效率高、操作方便、勞動強度小、自動化程度高、維修保養方便、外形美觀、清洗成本低等特點。
Through type spray cleaning machine is an automatic spray cleaning equipment, which is mainly used to clean iron filings, oil stains, dust, wax, oxide layer, etc. on the surface of workpieces in the production process. High pressure water is used to wash, wash, soak and spray the workpiece surface under high pressure, which has strong decontamination ability, fast dehydration, high efficiency, convenient operation, low labor intensity, high degree of automation, convenient maintenance, beautiful appearance and low cleaning cost.
1、清洗機的結構組成
1. Structure and composition of washing machine
通過式噴淋清洗機由水泵、水箱、過濾網、進水管及出水管組成
Through type spray washer consists of water pump, water tank, filter screen, water inlet pipe and water outlet pipe
2、清洗機的清洗工藝流程
2. Cleaning process flow of cleaning machine
通過人工上料到自動輸送機構進入設備內腔進行探針噴淋清洗、強風吹水、熱風烘干工藝處理，干燥完畢后在下料端由人工將工件從專用工裝取出。
The material is manually fed to the automatic conveying mechanism to enter the inner chamber of the equipment for probe spray cleaning, strong wind blowing and hot air drying. After drying, the workpiece is manually taken out from the special tooling at the blanking end.
3、清洗機的使用范圍
3. Scope of use of the washer
適用于各種汽車零件、五金零件的表面處理（如不銹鋼件）、機械零部件加工前的除油去污處理以及各類金屬制品表面的拋光打光處理等。
It is applicable to surface treatment of various automobile parts and hardware parts (such as stainless steel parts), degreasing and decontamination treatment of mechanical parts before processing, and polishing and polishing treatment of various metal products.
1、通過式清洗機會將被清洗物質放入金屬框內，根據清洗物的積垢程度，在一定程度上設定清洗時間，一般3-10分鐘，特別難清洗的物質，使用要求可適當延長清洗時間。（嚴禁把被清洗物質直接放在清洗槽底使用）。
1. The through type cleaner will put the cleaned substance into the metal frame, and set the cleaning time to a certain extent, generally 3-10 minutes, according to the scale degree of the cleaned substance. For substances that are difficult to clean, the cleaning time can be appropriately extended according to the use requirements. (It is strictly prohibited to put the cleaned substance directly at the bottom of the cleaning tank.).
2、通過式清洗機在進行操作時使用的電源是采用三芯插座（相線、零線、地線）。
2. Three core sockets (phase line, neutral line and ground wire) are used for the power supply of the through type cleaning machine during operation.

3、通過式清洗機的清洗槽內必須要加入清洗液或者是水，其清洗液或者是水的液面不得低于清洗槽高度的三分之二。清洗時，請根據不同的清洗要求，添加洗滌劑，加強清洗效率，所有洗滌劑必須符合不腐蝕清洗機內槽、清洗機的。
3. The cleaning tank of the through type cleaner must be filled with cleaning solution or water, and the liquid level of the cleaning solution or water shall not be less than two-thirds of the height of the cleaning tank. During cleaning, please add detergent according to different cleaning requirements to enhance cleaning efficiency. All the detergents must not corrode the inner groove and washer.
通過式清洗機設備在操作使用過程中為了能夠保證設備的良好性能，都是存在一定條件以及要求的。希望大家能夠通過上述所介紹的這些設備知識能夠?qū)Υ蠹也僮魇褂迷O(shè)備有所幫助，詳細了解關于清洗機設備的使用要求還是非常有必要的。
In order to ensure the good performance of the equipment during the operation, there are certain conditions and requirements. It is hoped that the equipment knowledge introduced above can help you operate and use the equipment, and it is necessary to understand the use requirements of the cleaning machine in detail.