The ultrasonic cleaning machine will cause damage to some parts during a long time of use. We need to maintain the ultrasonic cleaning machine. The maintenance of the ultrasonic cleaning machine needs to be done in place, so that the ultrasonic cleaning machine can better play a more high-energy cleaning effect for the user's cleaning work. How long can the ultrasonic cleaning machine be used continuously? Ultrasonic cleaning machine manufacturers for your analysis!

1.超聲波清洗設備的連續工作時間不得超過4小時

1. The continuous working time of ultrasonic cleaning equipment shall not exceed 4 hours

如果連續工作時間太長：將超聲調節旋鈕轉到“O”位置，讓冷卻風扇繼續工作，并在進行超聲清洗時繼續在超聲控制柜中散熱少2分鐘。未。對于已經運行了很長時間的洗衣機，應在關機之前將電源旋鈕調零，然后再使用風扇3-6分鐘，然后再關機以確保電源內部的熱量。

If the continuous working time is too long: turn the ultrasonic adjustment knob to the "O" position, let the cooling fan continue to work, and continue to dissipate heat in the ultrasonic control cabinet for at least 2 minutes during ultrasonic cleaning. Not activated. For the washing machine that has been running for a long time, the power knob should be adjusted to zero before shutting down, and then use the fan for 3-6 minutes, and then shut down to ensure the heat inside the power supply.

2.清潔劑應及時沉淀，過濾或更換，以確保清潔效果

2. The detergent shall be precipitated, filtered or replaced in time to ensure the cleaning effect

超聲波發生器會產生高頻和高壓，并通過電纜連接傳輸?shù)綋Q能器。換能器和振動板產生高頻共振。超聲波清洗機主要由超聲波清洗槽和超聲波發生器組成。用于超聲波清洗槽，底部裝有超聲波換能器振子，由高彈性，耐腐蝕的優良不銹鋼制成；從而可以通過超聲波作用清洗清洗槽中的溶劑。

The ultrasonic generator generates high frequency and high voltage and transmits them to the transducer through cable connection. The transducer and vibrating plate produce high-frequency resonance. The ultrasonic cleaning machine is mainly composed of ultrasonic cleaning tank and ultrasonic generator. It is made of stainless steel transducer with high elasticity and excellent corrosion resistance at the bottom; Thus, the solvent in the cleaning tank can be cleaned by ultrasonic action.

請手動調節電源旋鈕。確保電源旋鈕在小的地方。接通電源后，以免將清洗液浸入電位器中。超聲波清洗機的大功率模塊頻繁啟動，會影響設備的使用壽命。

Please adjust the power knob manually. Make sure the power knob is in a small place. After the power is turned on, avoid immersing the cleaning fluid into the potentiometer. Frequent startup of high-power module of ultrasonic cleaning machine will affect the service life of the equipment.